-
Products
-
Products
Our hot runner systems for the highest demands
PSG Plastic Service places great value on close cooperation with customers from the very beginning. For the development of your projects we bring a more than 50 years experience with diverse sectors, applications and plastics.
-
Hot runner systems
-
Hot runner systems
In the field of hot runners, our technical know-how is convincing. Whatever your requirements – be it a reduction of cycle times, a fast colour change, dimensional stability or gating of difficult to reach parts – together we will find a solution.
Product groups
- Open / ring gate manifold and single nozzles
- Valve gate manifold and single nozzles
- Manifold
- Operating units
- Hot halves
- Cascade injection moulding
- Injection nozzles / filter nozzles
- Tempering units and chillers
-
-
-
Hot runner control
-
Hot runner control
Since PSG Plastic Service develops and manufactures both hot runner controllers and hot runner systems, we know the requirements for control systems in detail.
Product groups
- profiTEMP+
- tempbox
- VCON Cascade control unit
- Accessories
-
-
Control systems
Everything from a single source: from series products to unconventional customer solutions
Product groups
- Multi loop controller sysTemp
- Multi loop controller flexotemp
- Hot runner controller system profiTEMP
- THYPO power controller
- IOs with Profinet IO
- Single loop controllers
- Multi loop cased controllers
- Operating panels
- Software
- Control modules for heaters
- Accessories
-
Standard parts
High-quality standard parts from Meusburger provide the reliable basis for making dies, moulds, jigs and fixtures. Through the systematic use of standard parts substantial cost savings can be made. At Meusburger all standard components are heat-treated for stress relief, guaranteeing low warping in further processing.
Product groups
- Mould Making
- Die Making
- Machine and jig construction
- Workshop equipment
- Special plates
- Special machining
At a glance: the profiTEMP+
04.10.2018
The profiTEMP+ Hot runner controller from PSG is sure to impress with its innovative technology and space-saving design. In addition to new intelligent functions like Smart Power Limitation (SPL) and MoldCheck, the tried and trusted features are further developed in the new hot runner controller. Due to the clearly designed 7" multi-touch screen, easy and intuitive operation is guaranteed.
Advantages during the injection moulding process
- Precision power dosage through high resolution of the actuating signal on the heating output
- Uniform, controlled heating-up with automatic ramp
- Relay heating – sequential heating up of zone groups
- Monitoring of the sensor signal to detect sensor breakage, polarity reversal and short-circuiting
- Safety shutdown in zones upon detection of a critical error in the heating circuit
- Early detection of leaks through continuous process monitoring
cTUVus approval
profiTEMP+ in both desktop housing versions has been certified in accordance with the American and Canadian product safety standards. You can then optionally obtain variants with unrestricted approval for the USA and Canada.
MoldCheck - efficient inspection of the hot runner system
Even before the startup of the mould, a fully automatic check of the wiring can be carried out. It is also possible to check the status of the heaters and sensors in the hot runner.
Smart Power Limitation - the intelligent function for limiting the power
Smart Power Limitation, the intelligent function for limiting the power, always prevents the heating power required by the heating outputs for control from exceeding the available power through the socket.
Moreover, the controller guarantees that the heating power emitted from the heating outputs is as even as possible.
This is how profiTEMP+ prevents power peaks and power fluctuations.
Reaction-free heating current measurement - not a millisecond of control loss
A measuring process must not affect the running process. PSG meets this high demand with the new profiTEMP+. The measurement of the heating current, which is important for the process, takes place without interruption of the control and output of heating pulses. With small nozzles in particular, gaps in the heating pulses for measurement of the heating current can lead to visible and measurable changes to the component.
To be brief: The profiTEMP+ guarantees an ultra-fast and reaction-free current measurement and therefore 100% quality because even just slight activity at the heating output can disturb the process.
Pairing Mode – combine two controllers into one
The pairing mode allows a simple coupling of two independent profiTEMP+. The devices are connected via an Ethernet cable by pressing a button. No special settings or hardware are required.
Both devices are displayed and operated via the cabinet which initializes the connection. This means that control systems of maximum 192 zones are feasible.
Pictures
United Kingdom [EN]