-
Products
-
Products
Our hot runner systems for the highest demands
PSG Plastic Service places great value on close cooperation with customers from the very beginning. For the development of your projects we bring a more than 50 years experience with diverse sectors, applications and plastics.
-
Hot runner systems
-
Hot runner systems
In the field of hot runners, our technical know-how is convincing. Whatever your requirements – be it a reduction of cycle times, a fast colour change, dimensional stability or gating of difficult to reach parts – together we will find a solution.
Product groups
- Open / ring gate manifold and single nozzles
- Valve gate manifold and single nozzles
- Manifold
- Operating units
- Hot halves
- Cascade injection moulding
- Injection nozzles / filter nozzles
- Tempering units and chillers
-
-
-
Hot runner control
-
Hot runner control
Since PSG Plastic Service develops and manufactures both hot runner controllers and hot runner systems, we know the requirements for control systems in detail.
Product groups
- profiTEMP+
- tempbox
- VCON Cascade control unit
- Accessories
-
-
Control systems
Everything from a single source: from series products to unconventional customer solutions
Product groups
- Multi loop controller sysTemp
- Multi loop controller flexotemp
- Hot runner controller system profiTEMP
- THYPO power controller
- IOs with Profinet IO
- Single loop controllers
- Multi loop cased controllers
- Operating panels
- Software
- Control modules for heaters
- Accessories
-
Standard parts
High-quality standard parts from Meusburger provide the reliable basis for making dies, moulds, jigs and fixtures. Through the systematic use of standard parts substantial cost savings can be made. At Meusburger all standard components are heat-treated for stress relief, guaranteeing low warping in further processing.
Product groups
- Mould Making
- Die Making
- Machine and jig construction
- Workshop equipment
- Special plates
- Special machining
PT 16-3
Product description
- Module with 16 analogue inputs (resistance thermometer Pt100; 3-wire) via CAN bus
- Data is cyclically sent via CAN bus and read by all connected controllers
- Status LEDs for signaling module status and interface operation
Advantages
- Peripheral signal processing
- Little installation effort
- Easy expansion
Product information
Technical specifications
General Data
| Rated voltage | 18-30 VDC |
| Power consumption | <2 W |
| Status display | LEDs |
| Dimensions | (HxWxD in mm) 99 x 45 x 114.5 |
| Mounting | DIN rail (DIN EN 50022) |
| Housing | Plastic, Phoenix ME 45 Bus 10/2 |
| Weight | 0.22 kg |
| Operating temperature | 0...55 °C |
| Connections | Spring terminal |
| Ingress protection | IP20 |
| Addressing mode | Auto addressing |
| Standards | CE, EN 61000-6-2:2001, EN 55022:1998 + A1:2000 + A2:2003 |
| Data backup | Power failure safe in EEPROM |
Data interfaces
| CAN | Series; protocols: CAN Bus Standard (2.0A), Canopen (Profile CiA 401 V2.01); Baud rate: 250 kBps |
Temperature measuring inputs
| Quantity | 16 |
| Resolution | 14 Bit |
| Type | Pt100; 3-wire |
| Division | -50...800°C |
| Measuring precision | < 1K |
| Monitoring | Sensor break and sensor polarity reversal |
Download
In the Media & Downloads section you will find an overview of all product-specific documents.
For technical data like e.g: User guides, service manuals, etc. please register.
United Kingdom [EN]