We are gladly available for you on Monday to Thursday from 7:30 a.m. to 5:00 p.m. and Friday from 7:30 a.m. to 4:00 p.m.

+ 49 6204 6069-0

Your message



Product description

  • One CI communication module is required for each THYPO system.
    It is the communication node to higher-level control and visualisation systems connected via Profinet-IO, CANopen, and Modbus TCP/IP. Additional interfaces (Ethernet TCP/IP, Powerlink, Varan) are in preparation.
  • System bus CAN
  • The project planning of the system is carried out via the web interface of the CI. Both the project planning and the configuration of the complete system are saved in the CI. Backing up or restoring from an external storage device is possible.
  • Supply of the power supply voltage for directly connected power controller modules
  • Up to 8 power controller modules can be connected to the CI. For systems with a higher number of power controller modules, the EI infeed modules must be used.
  • Maximum system configuration: 63 power controller modules (corresponds to up to 1512 independent power outputs)
  • Three digital inputs and outputs each, with configurable functions
  • Simple device diagnosis with colour switching LEDs for signalling status messages
  • Fixing to a downstream TP power controller module

Product information

Technical specifications

General Data

Product nameCI
Product descriptionCommunication module for the THYPO system
Item no.89181300-00
Item designation according to DIN EN 81346-2K


Power supply voltage24VDC ±10% (PELV), external fuse max. 3.15A F required
(e.g. Siba 189000.3.15 / fuse must reliably trip at 7.5A in 120 s)
Power consumptionmax. 7 W


Status LEDred (error)
green (flashing = boot loader, continuous light = okay)
System bus LEDred (system bus not running)
blue (system bus communication)

Digital input

Electrical data0...30VDC, <10mA at 24VDC (optocoupler)

Digital output

Electrical data0...30VDC, <50mA at 24VDC and Ta = 25°C (optocoupler)
Functionalarm output (configurable)

Alarm contact

Electrical data25VAC, 48VDC / 1A (potential-free contact) resistive and inductive load
Functionalarm output (configurable)


CANfor connection to the PLC/process control system or to flexotemp
System busCAN (via flat ribbon cable, bus termination is set automatically)
Ethernet TCP/IP1x RJ45 (with Ethercat option) otherwise 3 x RJ45
Real Time Ethernet2 x RJ45 (standard version Profinet IO)


Installation positionvertical
Mounting methodscrewed to the side of the first TP module
Type of ventilationself-ventilation (temperature controlled)
Sound pressure level<50dB
Ingress protectionIP 20
Depth124 mm (without connector)
Height334 mm (without mounting brackets, without supply connector)
Width40 mm

Electr. safety / EMC

Electrical safetyIEC 61010-1: 2010 / Amendment 1 (2017), EN 61010-1: 2010, IEC 61010-2-201 (2017) Ed.2, EN 61010-2-201: 2013
EMCemitted interference according to EN 61000-6-4, interference immunity according to EN 61000-6-2, (industry)
Over-voltage categoryIII
Ingress protectionI

Environmental conditions

Ambient temperature0....+55°C
Storage / transport temperature-25...+70°C
Air pressure860...1080 hPa
Humidityat 25°C / max. 95%
at 50°C / max. 50%
interpolated linearly in between
Pollution degree2
Installation altitude above sea levelmax. 2000 m


In the Media & Downloads section you will find an overview of all product-specific documents. 
For technical data like e.g: User guides, service manuals, etc. please register.

Media & downloads

Log in

Are you already a customer?

Do you already have a login for the PSG or Meusburger portal? Then simply log in here with the same login details:

Forgot your password?

Please enter your email address.
We will send you a new password.