Contact

We are gladly available for you on Monday to Thursday from 7:30 a.m. to 5:00 p.m. and Friday from 7:30 a.m. to 4:00 p.m.

+ 49 6204 6069-0

Your message

Operating units

Positioning with a turn to 0.01mm

The new compact operating unit (50x50x70 mm) is interesting both technically and in terms of price. The new development requires very little installation space. This saves space by smaller height of the mould, smaller distances between the nozzles, less loss of heat and raises the stiffness of the mould.
The pin is adjusted via a nonius that is easily reached from behind. The pin position can be exactly set to 0.01 mm without conversion, read and recorded. This leads to hardly visible feed points and an improved reproducibility of the feed point quality.

More power for less money

Despite the comfortable pin adjustment via nonius the new system is cheaper than its predecessor. One reason for this is the smaller width of the manifold. This reduces the heating power and the number of tabular heaters.

Space saving

Different sizes are available from the smallest nozzle series Micro to the largest nozzle series Easy Shot, the new operating units can be easily used. Moreover, the new developments only require a very small installation space. This reduces the machining time and the mould installation height.

More information in the product catalogue PSG SpeedCAD

In our product catalogue PSG SpeedCAD, you will find a complete product overview for our operating units including data sheets and CAD-data.

PSG Product catalogue

Operating unit for valve gates

Dirty hands are a thing of the past!

Compared to other systems the new operating unit from PSG offers the following advantages: The pin adjustment is possible without contact to the piston area (oil) and therefore absolutely clean. The setting of the pin is made from behind and is therefore easy to access and maintain. The pin can be easily disconnected and it can stay in the system while disassembling the unit. This reduces your setting and assembling times.

There are two versions available
  • 1. Flanged on the manifold including cooling In hydraulic (MH) and pneumatic (PH) versions.
  • 2. Installed in the clamping plate, also hydraulically (CH) and pneumatically (CP)
Without post-production cooling time

The set-up times for the flanged operating unit are reduced because the thermal decoupling has been very successful.